Industrial 3G Cellular Router
AUWM-A8503G
3G Wireless Cellular network router supporting a large number of communication interfaces and protocols to meet the demands of today’s telemetry and WAN applications.
The AUWM-A8503G allows you to build wide area networks utilizing the superior speeds supported by 3G UMTS networks. The AUWM-A8503G provides the user a point-to-point or pointto-multipoint communications link in a single compact and resilient unit.
The AUWM-A8503G is fully featured cellular network routers supporting a large number of communication interfaces and protocols to meet the demands of today’s telemetry and WAN applications.
The router’s Linux OS and available software development kit (SDK) offers the user the ability to install custom firmware via the application programming interface.
Designed with remote installation in mind, the AUWM-A8503G supports multi- level system monitoring, giving the user peace of mind the device will keep communication lines up and open.
Key Features
- Powerful and flexible industrial cellular router platform supporting various networks and services UMTS/HSDPA/HSUPA & GSM/GPRS/EDGE
- Industrial features – rugged enclosure, wide operating temperature range -30 to 70°C, wall mount option and captive DC terminal block
- Wide input voltage range 9-28V DC suitable for diverse environments and applications
- Embedded Linux operating system allowing for the installation of custom applications. SDK is available
- Web interface for easy centralized configuration and management from any PC
- One 10/100 Base-TX port for Ethernet and serial connections
- One RS232 DB9 DCE port for connection to serial devices
- One USB 2.0 host controller for adding on external devices like storage, GPS receiver or USB serial port converter
- VPN support for establishing a secure connection over public cellular network using IPsec or OpenVPN
- Internal PPTP and IPSEC VPN Client (tested on CISCO and Microsoft RAS)
- Supports SNMP with cellular specific MIB, PPPoE, RIP, VRRP. DDNS, MAC /NET address filtering, Open VPN, DHCP/DHCP relay
- Diagnostic log viewer via browser, remote diagnostics and configuration over the air
- PAD mode via the serial port, system monitoring
- Integrated GPS support via SDK (Software Development Kit)
Specifications| Category | Type | Details |
|---|
| General | Digital Memory | 8MB Flash 16MB DRAM |
| Dimensions (WxHxD) | 80mm x 140mm x 44mm (Excludes mounting wings) |
| Weight (kg) | 280g |
| Operating temperature (°C) | -30 - 70°C |
| Operating System | Embedded Linux |
| Interface | Connections | 1x Serial Port RS232 DB-9 female, 1x RJ-45 Port 10/100Base-TX Ethernet, 1x USB 2.0 Host Controller |
| RS-232 Port | 1 |
| Network | 1x10/100Mbit |
| Misc | Warranty | 1 Year |
| Power | Operating Voltage | 9-28VDC |
| Power Consumption | 230mA @12VDC (Standby), 550mA @12VDC (Maximum) |
| Radio | Standard Compliance | A-Tick, RoHS |
| Frequency Band | Quad-Band: 850/900/1800/1900 MHz, Tri-Band: 850/2100/1900 MHz |
| Data Rate (Mbps) | Downlink 7.2Mbps, Uplink 1.9Mbps (upgradable to 5.76Mbps) |
| Signal Indicator | Power, Network Service Type, Tx/Rx Data Traffic, Data Carrier Connection, Network Signal Strength |
| Antenna | Connector | 2x SMA-F (1x Main and 1x Rx Div) |
There are no Downloads available